The SilverTape™ products are double sided high performance acrylic based adhesive tapes, which are designed for a wide variety of materials with varying levels of surface energy. These superior high bond industrial strength tapes provide long term holding power and are suited for both interior or exterior applications. They are the perfect products to replace mechanical fasteners like rivets, screws, spot welds, and liquid adhesives.
SilverTape™ 6411 LSE is a multi-purpose double sided acrylic adhesive tape suitable for coatings and plastics with low surface energy (LSE). This tape was developed to eliminate the need to use a primer or adhesion promoter when bonding a tape to an LSE surface. The 6411 LSE is capable of absorbing the thermal expansions of the two different materials and maintains high impact resistance even at temperatures below 32 F° (0° C).
-Suitable for substrates with Low Surface Energy (LSE) (Powder coated metals, PP, PE, ceramics & silicones)
-Resistant to UV, aging, softening agents, and solvents
-High initial tack and good plasticizer resistance
-High level of resistance to peel and shear loads
-Closed cell structure is wind and water resistant
-May act as a sealant and forms a permanent tension free bond
-Minimum Temp. Range: -40 F
-Maximum Short Term Temp. Range: 248 F
-Maximum Long Term Temp. Range: 194 F
-Peel Adhesion: 22 lb/in (or 352 oz/in)
-Tensile Strength: 94 psi
-Thickness: 43 mil
-Coated Direct Foam
-This tape has a special coating in order for it to adhere to low surface energy (LSE) surfaces.
All tapes can be custom converted available upon request. (Minimum may apply)